Geosynthetic Biaxial Grids

Biaxial geogrids can take stresses in two directions and their apertures are more evenly dimensioned than their Uniaxial counterparts. They are useful in situations where stresses are applied in two directions, but don't have as much tensile strength in either direction as a uniaxial geogrid does in its direction of application.

Biaxial Geogrid

Biaxial Geogrid

London Plant Three Geogrids Stacked Angled

London Plant Three Geogrids Stacked Angled

Geogrid Bluebell Utah 10

Geogrid Bluebell Utah 10

Geogrid Bluebell Utah 4

Geogrid Bluebell Utah 4

Geogrid Bluebell Utah 9

Geogrid Bluebell Utah 9

London Plant Three Geogrids Stacked

London Plant Three Geogrids Stacked

Geogrid Bluebell Utah 3

Geogrid Bluebell Utah 3

Geogrid rolls stacked

Geogrid rolls stacked

London Plant Three Geogrids Stacked CU

London Plant Three Geogrids Stacked CU

Geogrid

Geogrid

Geogrid Bluebell Utah 1

Geogrid Bluebell Utah 1

Geogrid Bluebell Utah 7

Geogrid Bluebell Utah 7

Biaxial Geogrid
London Plant Three Geogrids Stacked Angled
Geogrid Bluebell Utah 10
Geogrid Bluebell Utah 4
Geogrid Bluebell Utah 9
London Plant Three Geogrids Stacked
Geogrid Bluebell Utah 3
Geogrid rolls stacked
London Plant Three Geogrids Stacked CU
Geogrid
Geogrid Bluebell Utah 1
Geogrid Bluebell Utah 7

Overview

Our Biaxial Grids have proven installation and success both domestically and globally. They are ideal for base reinforcement and subgrade improvement and provide cost efficiencies for roadway applications. By withstanding stressors from two directions, these corrosion-resistant grids are ideal for base reinforcement and subgrade improvement.

Features and Benefits

  • Withstands stressors in two directions
  • Contains and stabilizes soft soil
  • Provides cost efficiencies through reduced aggregate thickness, sub-grade material thickness and undercuts
  • Increases road service life
  • Resists corrosion and abrasion
  • Proven product with successful applications domestically and globally for over 30 years

Product Specifications

Bi-axial Grids Specifications
Product Values N/A ADS BX114GC ADS BX114GC ADS BX114GC ADS BX114GC
Index Properties Unit MD Values XMD Values MD Values XMD Values
Aperture Dimensions mm (in) 25 (1.0) 33 (1.3) 25 (1.0) 33 (1.3)
Minimum Rib Thickness mm (in) 0.76 (0.03) .76 (0.03) 1.27 (0.05) 1.27 (0.05)
Tensile Strength @ 2% Strain kN/m (lb/ft) 4.1 (280) 6.6 (450) 6.0 (410) 9.0 (620)
Tensile Strength @ 5% Strain kN/m (lb/ft) 8.5 (580) 13.4 (920) 11.8 (810) 19.6 (1340)
Ultimate Tensile Strength kN/m (lb/ft) 12.4 (850 ) 19.0 (1300) 19.2 (1310) 28.8 (1970)
Microsoft will be phasing out Internet Explorer soon. Because of this, we did not build the site to be used with IE. Please use Chrome, Edge or another browser to fully experience the new ADS website. .